A petrol pump looks simple from the road: a canopy, a few dispensers and an office. Underneath, it is one of the most tightly controlled building types there is.
The layout, the tank pit, the drainage, the forecourt slab and the safety provisions are all governed by oil company specifications and statutory rules, and mistakes can be dangerous and costly.
MTBOSS is an architect, interior design and construction company serving Moradabad and Bareilly, known for quality work, transparent pricing and on-time delivery. We do not claim fuel-station specialisation on this page. We explain what the civil and building side of such a project involves, and where specialists and the oil company take over.
Construction Services at MTBOSS
- Civil and building work: Foundations, frame, masonry, plaster and slabs
- Offices, shops and washrooms: On commercial sites, subject to discussion
- External works: Boundary walls, gates and related work
- Drainage and paving: Base work as allotted
- Waterproofing: Roofs, washrooms and walls
- Plumbing and electrical: For the building portions
Who Controls What on a Fuel Station Project
Roles on a petrol pump project are very different from an ordinary building.
- Oil marketing company: Usually provides or approves the layout, specifications, equipment and branding, and may require its own approved vendors for certain work.
- Statutory authorities: Issue licences and clearances for storing and dispensing petroleum products, and for building use, fire safety and environment, as applicable.
- Licensed specialists:Install tanks, pipelines, dispensers, earthing and safety systems to the oil company’s and authorities’ requirements.
- Structural and design professionals: Prepare structural and architectural drawings, and structural design and certification belong to a qualified structural engineer.
- Building contractor: Builds the civil and building portions to the approved drawings.
MTBOSS does not replace any of these. If an oil company requires empanelled contractors for particular works, that requirement must be met, and we will say plainly whether a given scope falls within what we can take on.
Approvals and Permissions Come First
Work should not begin until the approvals relevant to your project are in place.
- Allotment or agreement with the oil company, where applicable
- Land and use permissions for the intended activity
- Building plan sanction, where required
- Licences and clearances for petroleum storage and dispensing
- Fire, environment and other clearances, depending on the project
Site Visit and Written Scope
Our process starts on site.
- Visit the plot and note frontage, levels, access, drainage and neighbouring uses
- Review approved drawings and the oil company’s requirements
- Identify the civil and building scope and what belongs to specialists
- Prepare a written scope with inclusions and exclusions
- Explain materials and quality levels
- Share a staged quotation with clear assumptions
Work begins only after you approve the scope and quotation.
Cost depends on:
- Plot size and layout
- Scope allotted to the building contractor
- Size of the canopy, office and ancillary buildings
- Quality of finishes
- Soil and site conditions
- Site access and working conditions
Site Preparation and Levels
A fuel station depends on correct levels and drainage from the start.
- Clearing and levelling to the approved plan
- Setting-out of canopy columns, building lines and pavements from the drawings
- Reference levels fixed for forecourt slopes and drainage
- Protection of neighbouring structures and utilities during excavation
- Safe access for materials and equipment
An error in setting-out or levels repeats through the whole station, so patient checking here saves trouble later.
Underground Works and Specialist Interfaces
The tank installation area is the most critical part of a petrol pump, and it is done by qualified specialists to the oil company’s specification.
- Excavation and civil preparation are coordinated with the specialist and the approved drawings
- Soil, water table and neighbouring structures are considered by the designer and specialist
- Tank installation, pipelines and testing belong to the specialist
- Protection of the area during work, with barriers and signage
Forecourt and Canopy Work
The forecourt takes constant vehicle loads and fuel spills, so it needs careful civil work.
- Slab and paving base built to the specified thickness, strength and joints
- Correct slopes towards drains, so spills and rainwater do not collect
- Canopy foundations and columns built to the structural drawings
- Provision for canopy structure, lighting and signage, installed as the design requires
- Provision for dispenser islands, with bases and conduits placed as drawn
- Kerbs, crash protection and marking as designed
The structural engineer’s drawings govern slab design, canopy support and loads. We follow them without substitution.
Drainage and Oil Separation
Drainage at a fuel station must handle rain, washing water and spills carefully.
- Drain layout and slopes built to the approved drawings
- Separation or collection arrangements for oily water, as the design and the authorities require
- Chambers, covers and outlets built to the specified details
- Protection from water entering tank areas
- Connection to the permitted discharge point
Environmental and discharge rules vary and change over time, so the designer and the relevant authority decide what is required. We build the civil portion as drawn.
Office, Shop and Washrooms
The building portions of a petrol pump look like any small commercial building, though with their own constraints.
- Office and cash room with strong walls, doors and secure openings as designed
- Convenience shop, where planned, with durable floors and services
- Customer and staff washrooms, waterproofed and tested before tiling
- Store and utility rooms
- Ceilings, lighting and finishing suited to the brand’s requirements
- Provision for cooling, cabling and CCTV
Our tile and marble, carpenter, false ceiling, painter, plumber and electrician services help deliver these portions under one plan.
Electrical Work and Hazardous Areas
Electrical work near fuel areas follows special rules.
- Hazardous-area wiring, fittings and earthing must be installed by qualified specialists to the applicable standards
- Ordinary building areas, such as the office and washrooms, follow normal safe practice
- Clear separation of work scopes, so no one carries out electrical work outside their qualification
MTBOSS carries out only the portions of electrical work appropriate to ordinary building areas, and coordinates around specialist installations.
Fire Safety and Safety Systems
Fire safety is central to a fuel station.
- Layout and clearances are fixed by the approved drawings and the oil company’s requirements
- Fire fighting equipment, signage and systems are provided and installed as required
- Emergency routes and controls are part of the design
- Site rules for workers during construction include strict control of ignition sources near fuel areas
Specific requirements come from the oil company and authorities. We follow the approved drawings and site safety rules, and we do not alter safety-related provisions without written approval from the designer.
Safety During Construction
Construction on or beside a fuel site carries added risk.
- Permits and briefings as required by the oil company and site owner
- Control of ignition sources, including hot work, tools and smoking
- Safe handling and storage of materials
- Barriers and signage separating work areas from operating areas
- Protection of neighbours, customers and passers-by
- A clean, organised site with regular debris removal
If work is carried out beside an operating outlet, controls must be agreed with the outlet’s management and the oil company before starting. Applicable legal and safety requirements for labour and construction should be followed, and they can change over time.
Supervision and Quality
Steady supervision matters on any site and more so here.
- A named point of contact for you
- Work from approved drawings only
- Checks before concreting and at critical civil stages
- Levels and slopes verified before paving and drainage are finished
- Waterproofing tested before tiling in washrooms
- Pipes and conduits tested before they are covered, for building portions
- Regular updates by phone or WhatsApp, with dated photos
Where the structural engineer requires testing, we arrange it and keep the results. Our checks are advisory records of what we observe, and they do not replace the responsibilities of your structural engineer, specialists, the oil company or the authorities.
Materials and Workmanship
- Cement, steel, sand and aggregate from reliable sources
- Materials as specified in the approved drawings, with no unapproved substitutions
- Durable, easy-clean finishes for the building portions
- Waterproofing products suited to washrooms and roofs
- Protected storage on site, especially in the monsoon
Agreement and Payments
A written agreement protects both sides.
- Scope of work and the approved drawings it is based on
- What belongs to the building contractor and what belongs to specialists or the oil company
- Materials and quality levels
- Order of work and general schedule, with weather allowances
- Payment stages linked to completed work
- How changes and extra work are handled, with written approvals
- Responsibility for cleaning and debris removal
Be careful with any contractor who avoids writing things down, offers to bypass approvals or asks for a large advance before work begins.
Handover and Records
Before commissioning, owners should confirm:
- Final inspection of civil work, finishes and fittings
- Drainage and slope checks
- Waterproofing and plumbing checks for building portions
- Testing and commissioning of fuel and safety systems by the responsible specialists
- Final drawings, including any approved changes
- Photos of concealed work, such as steel, pipes and conduits
- Care and maintenance guidance for finishes, paving and washrooms
- Licences and clearances in place, with guidance from qualified professionals
Licences and clearances required before operation remain the owner’s responsibility.
Local Conditions in Bareilly
Bareilly has hot summers, humid monsoon months and cool winters, and civil work should respond.
- Careful curing of concrete in hot weather
- Scheduling that avoids rain damage and protects materials
- Drainage planning so water leaves the forecourt
- Materials suited to heat, rain and humidity
Choosing a Contractor for a Fuel Station
Ask every contractor the same questions.
- Have you completed similar work, and can I see it?
- Does the oil company require empanelled contractors for this scope?
- Which part of the work will you take on, and which belongs to specialists?
- Who supervises my site, and how often?
- How will you manage safety near fuel areas?
- How are changes priced and approved?
Proof of Completed Work
Our Portfolio page shows examples of MTBOSS work, and we encourage you to ask any contractor for the same.
Owner note: Add verified details below before publishing, or remove this block. Do not claim projects that were not completed.
- Completed fuel station or similar projects, if any: [Number, types and locations, or "None yet"]
- Other completed projects: [Number and types]
- Oil company empanelment, if any: [Details, or "None"]
- Years of operation: [Years]
- Client references on request: [Yes or No]
The MTBOSS Process
- Enquiry: Call or WhatsApp us with your location, project type and a short description.
- Requirements review:We discuss your oil company’s requirements and the approved drawings.
- Site visit: We visit, measure and discuss your needs and constraints.
- Scope and quotation:You receive a written scope that separates our portion from specialists’ work. Work begins only after you approve.
- Construction and supervision: Work is supervised with strict safety rules and updates.
- Inspection and handover: Civil work is inspected with your team and handed over with records.
Service Areas in Bareilly
MTBOSS serves clients in Bareilly, including areas such as Civil Lines, Rampur Garden, Izzatnagar, Subhash Nagar, DD Puram and Pilibhit Bypass Road. Our office is at Harthala Kanth Road, Moradabad. If your site is elsewhere in or around Bareilly, contact us and we will confirm availability.
Contact MTBOSS
Visit the MTBOSS website or the Contact page to try the Budget Calculator and view our Portfolio.
Build only to approved drawings and respect the specialists’ scope. Contact MTBOSS today to discuss your project in Bareilly.
Frequently Asked Questions
- Q1. Does MTBOSS do petrol pump construction in Bareilly?
We serve Bareilly with construction and renovation. Please discuss the scope we can take on for your project. - Q2. Have you built petrol pumps before?
Please ask us about relevant projects. We share only verified details on request. - Q3. Do you install fuel tanks and dispensers?
No. Licensed specialists do, to oil company and authority requirements. We handle suitable civil and building portions. - Q4. Do I need an oil company empanelled contractor?
It depends on the oil company and the scope. Please confirm its requirements before hiring anyone. - Q5. Can you help with licences and approvals?
We build from approved drawings. Licences and clearances should be confirmed with the oil company and authorities. - Q6. Does MTBOSS provide structural design?
We coordinate with a qualified structural professional, who provides structural certification. - Q7. What building work can you handle?
Forecourt slab bases, canopy foundations, offices, shops, washrooms, boundary walls and drainage, as allotted. - Q8. Do you visit the site before quoting?
Yes. We visit, measure and share a written scope and quotation. - Q9. How much does petrol pump construction cost in Bareilly?
It depends on layout, scope and site conditions. Final pricing follows the site visit. - Q10. How do I contact MTBOSS?
Call or WhatsApp +91 94584 10866, or use the contact form on mtboss.in.
